Epoxy Grout (3 Component)
EPOXY GROUT is hygienic, stain-resistant, 3 component epoxy resin based grout with a high degree of resistance to chemical attack, abrasion and impact. The cured grout does not transfer taints to food products, prevents the growth of fungi on the surface and can be easily maintained in a sterile condition.
EPOXY GROUT is designed for grouting glazed tiles, mosaic, vitrified and fully vitrified tiles, ceramic tiles, industrial tiles, granites, marbles & other natural stones, etc.
Related Products
Features & Benefits
- Hygienic and chemical resistant
- Stain and fungi resistant
- Can be cleaned off in 15 minutes and up to 60 minutes after application
- Provides high strength and durable joints
- Suitable for submerged conditions
- Easy to be cleaned from tiled surface
- Suitable for joint width of 1 – 12 mm
- Available in a wide range of colours
Product Details
Packaging
5 kg (2.5 kg x 2) &1 kg sets
Coverage
Consumption depend on joint width, size of tiles
Standards
- Exceeds EN 13888 requirements, Class RG -ReactiveGrout
- Tested in accordance with AATCC 30 PART 3
How to apply
- Before commencing grouting, the adhesive bed must be set.
- The joints must be clean of all adhesive residue, dust or debris.
- Lightly sponge the tile surface to remove dust & dirt.
Movement Joints: These should be provided in accordance with BS 5385:part 1 – 5 and may be filled with the appropriate flexible sealant. Intermediate floor joints should be reinforced with brass or stainless steel. Use stainless steel where hygiene is essential.
The entire contents of PART A and PART B should be poured into a clean mixing vessel and mix to a uniform consistency. Slowly add PART C until the required slump free smooth paste is obtained. Immediately pour the mixed grout onto the working area.
- Using a hard rubber grout float, compact the EPOXY GROUT into the joints ensuring that they are completely filled. Work in small areas and remove as much excess from the tile/stone surface as possible. Strike off excess materials diagonally to the grout lines.
- Between 15 – 60 minutes after application, check for joints to be stiff. Use a scrubber (for rustic & matt finish tiles) or sponge/clean cloth (for smooth tiles) dampened with clean water to scrub the tile surface in a circular motion diagonally to the grout lines in both clock-wise and anti clock-wise directions.
- After 12 – 24 hours, clean the tile surface with water and soap solution to remove any epoxy stains.
Tools and containers may be cleaned using water when the grout is still fresh. The hardened grout can be removed from tools mechanically.
- Walls and Floors
- Interiors and Exteriors
- Dry areas
- Showers
- Swimming Pools
- Heavily Trafficked Floors
- Hygienic Sterile Areas
- Kitchens and Cafeterias
Sold subject to the Company’s conditions of sale which are available on request.