Nitotile MPA
Nitotile MPA is high performance, polymer modified adhesive and it is suitable for Tile on Tile, glass mosaic tiles and stone tiles subjected to damp and tropical conditions. It is suitable for fixing wall and floor tile/stone in interior and exterior situations upto 6mm bed thickness.
Related Products
Features & Benefits
- Tile on tile.
- Glass mosaic tile fixing.
- Vitrified tiles fixing.
- Tiles in swimming pools.
- Excellent Grasp: Suitable for tile format both S1 and S2
- Easy mixing, smooth application & spread
- Better workability
- Excellent slip resistance
- High bond strength
Product Details
Packaging
20 kg & 40 kg Bags
Coverage
- Approx.1.25 to 1.35 kg /mm/sq.m.
Color
White
Certification
- IS : 15477-2019 TYPE 4
How to apply
Ensure the surfaces are prewetted and remove the excess water
Remove all loose or hollow portions and make good with a polymer modified mortars from Renderoc Range.
Check that existing finish is firmly adhering to the base. Remove any loose or hollow sounding tiles and reprofile with polymer modified mortars from Renderoc Range.
Nitotile MPA should be mixed with clear potable water in the ratio 0.26 to 0.30. A slow speed drill fitted with a mixing paddle is recommended for mixing. Add powder to water and mix until a uniform, lump-free consistency is achieved. The total quantity of water may be slightly adjusted to achieve the required consistency.
- Make sure that required amount of adhesive shall be mixed & used within the specified pot life. Spread not more than the area which can be tiled within the open time of the adhesive.
- Using a notch trowel, uniformly comb the tile adhesive to required thickness.
- Firmly fix the tiles into position with a slight twisting action, ensuring good contact without leaving any voids behind tiles.
- Tiles should be fi xed within specifi ed open time of adhesive, depending on the porosity of the substrate and atmospheric conditions. Adhesive ribs can be checked periodically and if a skin has formed, remove the adhesive and apply a new layer.
- Spacers & corner beads of required dimensions shall be used to maintain adequate joints between individual tiles on horizontal or vertical areas.
- Remove any excess adhesive from the tiles and joints with a damp sponge or cloth before it sets. Leave for at least one day before application of tile grouts. It is recommended to use Nitotile cementitious/epoxy tile grouts.
Cleaning
Nitotile MPA should be removed from tools, equipment and mixers with clean water immediately after use. Cured material can only be removed mechanically
- Walls & Floors
- Interiors & Exteriors
- Wet areas
- Showers
- Swimming Pools
- Dry areas
- Brick Work / Concrete
- Cement Sand Screed
- Cement Sand Rendering
- Unglazed Tiles
- Hard Natural Stone
- Glazed Tiles and tile on tile